Implementing and Operating Cisco Enterprise Network Core Technologies Demo Questions
Here you can find Implementing and Operating Cisco Enterprise Network Core Technologies exam sample questions which will help you to prepare for your upcoming certification test. These questions will give you an idea of what to expect on the exam and help you review the 350-401 ENCOR study material. Be sure to go over the Free 350-401 ENCOR questions multiple times so that you are confident and comfortable with the material. You can always go to the full 350-401 ENCOR dumps here.
These Implementing and Operating Cisco Enterprise Network Core Technologies certification questions are designed to give you a feel for the material you'll be tested on. They cover a wide range of topics, so you can get a sense of what to expect on examination day.
These 350-401 ENCOR dumps are updated regularly, so you can be confident that you're studying with the most up-to-date information available. We also provide answer keys so that students can check their work.
Additionally, going through Implementing and Operating Cisco Enterprise Network Core Technologies practice questions can help you identify any areas where you need more review. Taking advantage of our 350-401 ENCOR demo questions is a great way to set yourself up for success on the real thing.
These Implementing and Operating Cisco Enterprise Network Core Technologies questions cover the material that will be on the test, and provide an opportunity for students to practice their skills. The questions are designed to be similar to those that will be on the actual Implementing and Operating Cisco Enterprise Network Core Technologies exam, so that students can get a feel for what they will be facing. We believe that by providing these demo questions, students will be better prepared and more likely to succeed on their exams.
Good luck for the 350-401 ENCOR exam!
Implementing and Operating Cisco Enterprise Network Core Technologies Sample Questions:
1. In a Cisco SD-WAN solution, how Is the health of a data plane tunnel monitored?
A. with IP SLA
B. ARP probing
C. using BFD
D. with OMP
2. How does the EIGRP metric differ from the OSPF metric?
A. The EIGRP metric is calculated based on bandwidth only. The OSPF metric is calculated on delay only.
B. The EIGRP metric is calculated based on delay only. The OSPF metric is calculated on bandwidth and delay.
C. The EIGRP metric Is calculated based on bandwidth and delay. The OSPF metric is calculated on bandwidth only.
D. The EIGRP metric Is calculated based on hop count and bandwidth. The OSPF metric is calculated on bandwidth and delay.
3. . Refer to the exhibit
Which command must be configured for RESTCONF to operate on port 8888?
A. ip http port 8888
B. restconf port 8888
C. ip http restconf port 8888
D. restconf http port 8888 4
4. AN engineer is implementing MPLS OAM to monitor traffic within the MPLS domain. Which action must the engineer perform to prevent from being forwarded beyond the service provider domain when the LSP is down?
A. Disable IP redirects only on outbound interfaces
B. Implement the destination address for the LSP echo request packet in the 127.x.y.z/8 network
C. Disable IP redirects on all ingress interfaces
D. Configure a private IP address as the destination address of the headend router of Cisco MPLS TE.
5. Which protocol is implemented to establish secure control plane adjacencies between Cisco SD-WAN nodes?
A. IKF
B. DTLS
C. IPsec
D. ESP
6. Refer to the exhibit.
What are two effect of this configuration? (Choose two.)
A. Inside source addresses are translated to the 209.165.201.0/27 subnet.
B. It establishes a one-to-one NAT translation.
C. The 10.1.1.0/27 subnet is assigned as the inside global address range.
D. The 209.165.201.0/27 subnet is assigned as the outside local address range.
E. The 10.1.1.0/27 subnet is assigned as the inside local addresses.
7. Refer to the exhibit.
An engineer must permit traffic from these networks and block all other traffic An informational log message should be triggered when traffic enters from these prefixes Which access list must be used?
A. access-list acl_subnets permit ip 10.0.32.0 0 0.0.255 log
B. access-list acl_subnets permit ip 10.0.32.0 0.0.7.255 log
C. access-list acl_subnets permit ip 10.0.32.0 0.0.7.255 access-list acl_subnets deny ip any log
D. access-list acl_subnets permit ip 10.0.32.0 255.255.248.0 log
8. Refer to the exhibit.
Which privilege level is assigned to VTY users?
A. 1
B. 7
C. 13
D. 15
9. What are two benefits of virtual switching when compared to hardware switching? (Choose two.)
A. increased MTU size
B. hardware independence
C. VM-level isolation
D. increased flexibility
E. extended 802.1Q VLAN range
10. When a wireless client roams between two different wireless controllers, a network connectivity outage is experience for a period of time. Which configuration issue would cause this problem?
A. Not all of the controllers in the mobility group are using the same mobility group name.
B. Not all of the controllers within the mobility group are using the same virtual interface IP address.
C. All of the controllers within the mobility group are using the same virtual interface IP address.
D. All of the controllers in the mobility group are using the same mobility group name.