Implementing Cisco Enterprise Advanced Routing and Services Demo Questions
Here you can find Implementing Cisco Enterprise Advanced Routing and Services exam sample questions which will help you to prepare for your upcoming certification test. These questions will give you an idea of what to expect on the exam and help you review the 300-410 ENARSI study material. Be sure to go over the Free 300-410 ENARSI questions multiple times so that you are confident and comfortable with the material. You can always go to the full 300-410 ENARSI dumps here.
These Implementing Cisco Enterprise Advanced Routing and Services certification questions are designed to give you a feel for the material you'll be tested on. They cover a wide range of topics, so you can get a sense of what to expect on examination day.
These 300-410 ENARSI dumps are updated regularly, so you can be confident that you're studying with the most up-to-date information available. We also provide answer keys so that students can check their work.
Additionally, going through Implementing Cisco Enterprise Advanced Routing and Services practice questions can help you identify any areas where you need more review. Taking advantage of our 300-410 ENARSI demo questions is a great way to set yourself up for success on the real thing.
These Implementing Cisco Enterprise Advanced Routing and Services questions cover the material that will be on the test, and provide an opportunity for students to practice their skills. The questions are designed to be similar to those that will be on the actual Implementing Cisco Enterprise Advanced Routing and Services exam, so that students can get a feel for what they will be facing. We believe that by providing these demo questions, students will be better prepared and more likely to succeed on their exams.
Good luck for the 300-410 ENARSI exam!
Implementing Cisco Enterprise Advanced Routing and Services Sample Questions:
1. Refer to the exhibit.
An IP SLA is configured to use the backup default route when the primary is down, but it is not working as desired. Which command fixes the issue?
A. R1(config)# ip route 0.0.0.0.0.0.0.0.2.2.2.2 10 track 1
B. R1(config)# ip route 0.0.0.0.0.0.0.0.2.2.2.2
C. R1(config)#ip sla track 1
D. R1(config)# ip route 0.0.0.0.0.0.0.0.1.1.1.1 track 1
2. Refer to the following output:
Router#show ip nhrp detail 10.1.1.2/8 via 10.2.1.2, Tunnel1 created 00:00:12, expire 01:59:47 TypE. dynamic, Flags: authoritative unique nat registered used NBMA address: 10.12.1.2
What does the authoritative flag mean in regards to the NHRP information?
A. It was obtained directly from the next-hop server.
B. Data packets are process switches for this mapping entry.
C. NHRP mapping is for networks that are local to this router.
D. The mapping entry was created in response to an NHRP registration request.
E. The NHRP mapping entry cannot be overwritten.
3. Which two methods use IPsec to provide secure connectivity from the branch office to the headquarters office? (Choose two.)
A. DMVPN
B. MPLS VPN
C. Virtual Tunnel Interface (VTI)
D. SSL VPN
E. PPPoE
4. A network engineer is investigating a flapping (up/down) interface issue on a core switch that is synchronized to an NTP server. Log output currently does not show the time of the flap. Which command allows the logging on the switch to show the time of the flap according to the clock on the device?
A. service timestamps log uptime
B. clock summer-time mst recurring 2 Sunday mar 2:00 1 Sunday nov 2:00
C. service timestamps log datetime localtime show-timezone
D. clock calendar-valid
5. Which protocol is used in a DMVPN network to map physical IP addresses to logical IP addresses?
A. BGP
B. LLDP
C. EIGRP
D. NHRP
6. During the maintenance window an administrator accidentally deleted the Telnet-related configuration that permits a Telnet connection from the inside network (Eth0/0) to the outside of the networking between Friday – Sunday night hours only. Which configuration resolves the issue? A) 5 B) C) D) 6
A.
B.
C.
D.
7. Refer to the exhibit.
An engineer is monitoring reachability of the configured default routes to ISP1 and ISP2. The default route from ISP1 is preferred if available. How is this issue resolved?
A. Use the icmp-echo command to track both default routes
B. Use the same AD for both default routes
C. Start IP SLA by matching numbers for track and ip sla commands
D. Start IP SLA by defining frequency and scheduling it
8. What is a limitation of IPv6 RA Guard?
A. It is not supported in hardware when TCAM is programmed
B. It does not offer protection in environments where IPv6 traffic is tunneled.
C. It cannot be configured on a switch port interface in the ingress direction
D. Packets that are dropped by IPv6 RA Guard cannot be spanned
9. Refer to the exhibit.
A network engineer for AS64512 must remove the inbound and outbound traffic from link A during maintenance without closing the BGP session so that there ________ a backup link over link A toward the ASN. Which BGP configuration on R1 accomplishes this goal?
A.
B.
C.
D.
10. Which is statement about IPv6 inspection is true?
A. It teams and secures bindings for stateless autoconfiguration addresses in Layer 3 neighbor tables
B. It learns and secures bindings for stateful autoconfiguration addresses in Layer 3 neighbor tables
C. It teams and secures bindings for stateful autoconfiguration addresses in Layer 2 neighbor tables
D. It team and secures binding for stateless autoconfiguration addresses in Layer 2 neighbor tables.