Troubleshooting Cisco Data Center Infrastructure Demo Questions
Here you can find Troubleshooting Cisco Data Center Infrastructure exam sample questions which will help you to prepare for your upcoming certification test. These questions will give you an idea of what to expect on the exam and help you review the 300-615 DCIT study material. Be sure to go over the Free 300-615 DCIT questions multiple times so that you are confident and comfortable with the material. You can always go to the full 300-615 DCIT dumps here.
These Troubleshooting Cisco Data Center Infrastructure certification questions are designed to give you a feel for the material you'll be tested on. They cover a wide range of topics, so you can get a sense of what to expect on examination day.
These 300-615 DCIT dumps are updated regularly, so you can be confident that you're studying with the most up-to-date information available. We also provide answer keys so that students can check their work.
Additionally, going through Troubleshooting Cisco Data Center Infrastructure practice questions can help you identify any areas where you need more review. Taking advantage of our 300-615 DCIT demo questions is a great way to set yourself up for success on the real thing.
These Troubleshooting Cisco Data Center Infrastructure questions cover the material that will be on the test, and provide an opportunity for students to practice their skills. The questions are designed to be similar to those that will be on the actual Troubleshooting Cisco Data Center Infrastructure exam, so that students can get a feel for what they will be facing. We believe that by providing these demo questions, students will be better prepared and more likely to succeed on their exams.
Good luck for the 300-615 DCIT exam!
Troubleshooting Cisco Data Center Infrastructure Sample Questions:
1. A system administrator connects a Cisco Nexus 2248PQ FEX to a fabric interconnect to expand the ports that are available for connecting Cisco UCS C-Series Rack Servers. In Cisco UCS Manager, the administrator does not see the servers connected to this FEX. Which action should be taken to resolve the issue?
A. The FEX must be exchanged so that it supports the connectivity between fabric interconnects and UCS CSeries servers
B. The fabric interconnects must be rebooted before the FEX is recognized
C. The transceivers must be exchanged to support the connectivity between the FEX and the fabric interconnects
D. The ports that connect the FEX to the fabric interconnects must be configured as server ports
2. Refer to the exhibit.
A network engineer configures an EEM script to get a syslog notification after a configuration change. This message appears when the engineer must make a new configuration to this switch. Which configuration did the engineer neglect to apply in the script for it to function properly?
A. event cli match ‘configure terminal’
B. event policy-default count 1 time 100
C. event syslog occurs 10
D. action 2.0 event-default
3. Refer to the exhibit.
VSAN traffic is not routed as expected. Which action should be taken to resolve the issue?
A. Reset the error packet counter
B. Configure the hello timer to match the neighbor
C. Configure the FSPF dead interval with a value higher than 80 seconds
D. Reset the inactivity timer on switch-2
4. A request to activate the port security database is rejected. Which action do you perform to investigate the cause of the issue?
A. Enable the auto-learning feature.
B. Use the force option to identify rejected devices.
C. Find conflicting entries between the active and configuration databases.
D. Verify that devices are fully attached to the active database.
5. Refer to the exhibits.
An engineer is implementing the SAN based on the Cisco MDS 9000 Series Switches. When operating the environment, the engineer encounters the error shown. Which action resolves the issue?
A. Copy VSAN 101 to the fabric binding database on the MDS-1 switch
B. Add the World Wide Name of the neighboring switch to the MDS-1 switch
C. Configure the port security feature on the MDS-1 switch
D. Enable VSAN 101 on the peer MDS 2 switch fabric interconnect 5
6. Refer to the exhibit.
An engineer deploys SAN environment with two interconnected Cisco MDS 9000 Series switches. When the engineer attempts a zone merge, it fails with the error that is presented in the exhibit. Which action resolves the issue?
A. Import or export a zone set between the switches to synchronize the switches.
B. Change the name of one of the zones to match the other zone set.
C. Set the distribute policy of the zone to full.
D. Ensure that the zone members have different names.
7. Refer to the exhibit.
A web browser displays a “not secure” warning message when accessing the web interface of Cisco UCS Manager. Which action resolves the issue?
A. Load third-party certificate to UCS Manager.
B. Use the correct TCP port for HTTPS.
C. Use a supported web browser.
D. Use a supported version of UCS Manager.
8. Refer to the exhibit.
The HSRP configuration in the exhibit fails to function. Which action resolves this issue?
A. Enable IP redirects.
B. Set the MTU to 1500 bytes.
C. Configure HSRP version 2.
D. Configure the same HSRP group on both devices.
9. Refer to the exhibit.
The script fails to bring up Ethernet 1/2 when Ethernet 1/1 goes down. Which change enables the script to run as intended?
A. Set the port VLAN
B. Include an action to manually shut down Ethernet 1/1
C. Add an action to configure the terminal
D. Configure an enable action
10. Refer to the exhibit.
The initiator that has FC ID 0x970102 fails to communicate with the target that has FC ID 0x970200. What action resolves the issue?
A. Reconfigure the initiator and the target to be in the same zones.
B. Reactivate the zoneset.
C. Reset the port for FC ID 0x970102 and FC ID 0x970200 to log in to the fabric.
D. Reset the port for FC ID 0x970209 and FC ID 0x9700c2 to log in to the fabric.