Implementing and Operating Cisco Service Provider Network Core Technologies Demo Questions
Here you can find Implementing and Operating Cisco Service Provider Network Core Technologies exam sample questions which will help you to prepare for your upcoming certification test. These questions will give you an idea of what to expect on the exam and help you review the 350-501 SPCOR study material. Be sure to go over the Free 350-501 SPCOR questions multiple times so that you are confident and comfortable with the material. You can always go to the full 350-501 SPCOR dumps here.
These Implementing and Operating Cisco Service Provider Network Core Technologies certification questions are designed to give you a feel for the material you'll be tested on. They cover a wide range of topics, so you can get a sense of what to expect on examination day.
These 350-501 SPCOR dumps are updated regularly, so you can be confident that you're studying with the most up-to-date information available. We also provide answer keys so that students can check their work.
Additionally, going through Implementing and Operating Cisco Service Provider Network Core Technologies practice questions can help you identify any areas where you need more review. Taking advantage of our 350-501 SPCOR demo questions is a great way to set yourself up for success on the real thing.
These Implementing and Operating Cisco Service Provider Network Core Technologies questions cover the material that will be on the test, and provide an opportunity for students to practice their skills. The questions are designed to be similar to those that will be on the actual Implementing and Operating Cisco Service Provider Network Core Technologies exam, so that students can get a feel for what they will be facing. We believe that by providing these demo questions, students will be better prepared and more likely to succeed on their exams.
Good luck for the 350-501 SPCOR exam!
Implementing and Operating Cisco Service Provider Network Core Technologies Sample Questions:
1. Refer to the exhibit:
This configuration is being applied on an IOS XR router. Which statement about this configuration is true?
A. It is used to create a subscription to specify the streaming interval
B. It is used to identify traps for SNMP polling
C. It is used to identify MIB entries and has a list of YANG models
D. It is used to create a sensor-group and has a list of YANG models for streaming
2. Refer to the exhibit.
While troubleshooting the OSPF adjacency between routers R1 and R2 an engineer noticed that both routers are stuck in the EXCHANGE/EXSTART state. What should the engineer fix to solve the ongoing issue?
A. match IPv4 addresses
B. match OSPF areas
C. match OSPF network types
D. match MTU values
3. Refer to the exhibit:
A network operator working for service provider with an employee id 3715 15:021 applied this configuration to a router. Which additional step should the engineer use to enable LDP?
A. Disable Cisco Express Forwarding globally
B. Delete the static router ID
C. Enable MPLS LDP on the interface
D. Configure the both keyword to enable LDP globally
4. Refer to the exhibit.
A network engineer must meet these requirements to provide a connects, solution: (i) The customer connected to Area 2 needs to access the application in Area 1 on the 10.10.10.0/24 subnet (ii) The Customer must not have access to the 20.10 30.0/24 subnet. (iii) The service provider must make sure that the Area 2 routing database limits the number of IP addresses in the routing table.
Which two configurations must be implemented to meet the requirements? (Choose two)
A. Set a tag value of 200 to match the summary address 10.0.0/16 on R2.
B. Set a tag value of 200 to match the summary address 10.0.0.0/16 on R3.
C. Apply the route map for tag 200 and leak Level 2 routes into Level 1 Area 2 on R3
D. Apply the route map for tag 200 and teak Level 2 routes into Level 1 Area 2 on R4.
E. Set a tag value of 200 to match the summary address 10.0.0./16 on R1.
5. Refer to the exhibit:
What does the REST API command do?
A. It retrieves the information requested by Descriptions xml
B. It removes the information identified by Descriptions xml
C. It executes the commands specified in Descriptions xml
D. It displays the information identified by Descriptions xml
6. Refer to the exhibit.
An engineer is implementing BGP selective prefix suppression. The router must advertise only 10.16.4.0/24,10.16.5.0/24. and summarized route 10.16.0.0/21. and suppress 10.16.6.0/24. Which configuration must the engineer apply to the router?
7. A network engineer is configuring a BGP route policy for the SUBNET prefix set. Matching traffic must be dropped, and other traffic must have its MED value set to 400 and community 4:400 added to the route. Which configuration must an engineer apply?
8. What is a characteristic of prefix segment identifier?
A. It contains a router to a neighbor
B. It contains the interface address of the device per each link
C. It is globally unique.
D. It is locally unique.
9. Refer to the exhibit.
Router BRDR-1 is configured to receive the 0.0.0.0/0 and 172.17.1.0/24 network via BGP and advertise then into OSPF area 0. An engineer has noticed that the OSPF domain is receiving only the 172.17.1.0/24 route and default router 0.0.0.0/0 is still missing. Which configuration must an engineer apply to resolve this problem? Select One.
10. After implement MPLS protocol for multiple VRFs on a single Cisco device, the engineer notices all VRFs on the router still do to not LDP session protection feature enabled. Which configuration must the engineer apply to enable the LDP session protection feature FOR LDP neighbors within each VRF?
A. Configure LDP session protection globally on the device only
B. Configure LDP session protection globally on the device and on each neighbor that requires session protection
C. Configure LDP session authentication on the device to enable LDP session protection on each VRF automatically
D. Configure LDP session protection within the individual VRFs